Microphone Headset Head Wear Mic Easy To Use for Teaching, Bukit Batok

1. Plug and Play: This product does not require a cumbersome matching and connection process. Open the microphone and insert it into the phone to start recording; It is simple to use and has a cordless design, making it more suitable for live recording of online class meetings.
2. Intelligent Noise Reduction: It is equipped with windproof sponge to avoid spraying; Its built in intelligent noise reduction chip has strong anti interference ability and can effectively filter the surrounding noisy noise; The maximum reception range is 25M, which can be used normally outdoors.
3. Low Latency: This microphone is equipped with a highly sensitive capacitive connector, which provides faster response and more detailed reception, recording every detail of the sound.
4. Long Battery Life: The product is equipped with a high capacity lithium battery, and both the receiver and microphone can have a capacity of 500 mAh; It can be used for up to 15 hours, and can be used with a micro charging interface to power the product at any time.
5. Applicable to: The product is compatible with most products on the market with 3.5mm/0.14in and 6.35mm/0.25in interface interfaces, such as cameras, computers, mobile phones, sound cards, amplifiers, and so on.

Specification:
Item Type: Microphone headset
Weight: 138.00g/4.87oz
Product Material: ABS, aluminum alloy
Receiver Battery Type: Lithium ion battery (shipped with built in battery)
Receiver Battery Capacity: 500 mAh
Microphone Battery Type: Lithium ion battery (shipped with built in battery)
Microphone Battery Capacity: 500 mAh
Power Consumption: ≤ 35 mAh
Transmission Frequency: 2400Hz
Receiving Frequency: 2400Hz
Microphone Charging Time: About 4 hours
Usage Time: About 15 hours
Charging Interface: Micro USB
Frequency Response Range: 20Hz to 20KHz
Signal to Noise Ratio: ≥ 75dB
Applicable Equipment: Equipment with 3.5mm interface, audio equipment with 6.35mm interface

How to Use:
1. Insert the 3.5m/0.14in plug on the receiving end of the product into the 3.5m/0.14in jack of the device. After successful connection, the indicator light will remain on. 2. Press and hold the power on button for 3 seconds, and the indicator light will flash. After pairing with the receiving end, the indicator light will remain on, indicating that the pairing connection is successful. 
3. Increase the volume and decrease the volume by briefly pressing the power button on the microphone.

Package List:
1 x Transmitter
1 x Receiver
1 x Conversion Head
1 x Charging Line
1 x Sponge
1 x Headwear Clip

Note:
Shipped with built in battery.