H743 SLIM V3 for FPV RC Racing Drone for FPV Drone 2-8S …, Bukit Batok

Compact Design: The slim and compact design of the H743-SLIM V3 makes it easy to install and handle, enhancing your flying experience. High Performance: Experience superior flight with the H743-SLIM V3 2-8S Flight Controller, designed for optimal performance in RC FPV drones.
Easy Assembly: The H743-SLIM V3 comes unassembled, allowing for easy customization and personalization to suit your needs. Suitable for Older Teens: With a recommended age of 14 years and above, this flight controller is perfect for older teens and adults.
Durable Material: Crafted from composite material, this flight controller ensures durability and , standing up to rigorous use.
H743-SLIM H743SLIM V3 2-8S Flight Controller H743 BetaFlight

FC Specifications:
MCU: STM32H743VIH6,480MHz,1MB RAM,2MB Flash;
ICM: 42688P;
Baro: DPS368 (I2C2);
OSD: AT7456E (SPI2);
Blackbox: MicroSD card socket (SDIO);
7*Uarts (1,2,3,4,6,7,8) with built-in inversion.
13*PWM outputs (including "LED" pad);
2*I2C
1*CAN
6*ADC (VBAT, Current, RSSI, Analog AirSpeed, Vbat2, Cur2)
3*LEDs for FC STATUS (Blue, Red) and 3.3V indicator
1x SPI3 breakout
USB Type-C (USB2.0)
1x JST-SH1.0_8pin connector (Vbat/G/Curr/Rx8/S1/S2/S3/S4)
1x JST-GH1.25_4pin connector (5V/CAN-H/CAN-L/G)
Dual Camera Inputs switch
5V/Vbat filtered power ON/OFF switch
For FPV OSD is supported by any spare UART

Power:
Vbat Input: 6~36V (2~8S LiPo)
BEC: 5V 2A cont. (Max.3A)
LDO 3.3V: Max.200mA
No Current Sensor built-in
ADC Vbat2 pad supports Max. 69V (voltage divider: 1K:20K)
Static power: 200mA@5V with Betaflight, 150mA@5V with ArduPilot

FC Firmware
ArduPilot (ChiBiOS): MATEKH743
BetaFlight: MATEKH743
INAV: MATEKH743

Physical
Mounting: 30.5 x 30.5mm, Φ4mm with Grommets @3mm
Dimensions: 36 x 36 x 5 mm
Weight: 7g
Color: Blue
Material: PCB

Package Contents:
1*Flight Controller Kit

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.