Crocodile Flex shield Cement Flexible Waterproofing Size 1 …, Geylang

Crocodile Flex Shield
Flexible waterproofing cement (Single ingredient type)
High flexibility Cover cracks well For surfaces with a movement of not more than 0.75 mm.
Emits bare, UV resistance, good weather resistance.
Can withstand water pressure more than 1.5 bar without leakage.
No toxic substances (Non-toxic) can be used to store drinking water and paint the walls, floors, fish ponds.
Can be painted over Or can be tiled over
High adhesion strength Can convert the surface to concrete such as metal, foam, wood, plastic, etc.
Crocodile Flex Shield is an elastic waterproofing cement. One-ingredient Easy to use, just mix with water. Good weather resistance, can be released, UV resistant, has good crack coverage properties. Can be used in areas with a chance. Moving The finished surface is durable, does not peel off, has strength.Good adhesion, no toxins
Usage characteristics
Suitable for waterproofing work in general cement work and more such as decks, roofs, balconies, bathrooms, swimming pools, reservoirs, water tanks, fish ponds, fish tunnels, basement tunnels, laying corridor sheets (Solar slab), decks to garden floating. Areas with the opportunity to move Apply before tiling or painting.Topcoat on the structure Can be applied over the original leaking tile before laying new tiles over it. (Without dismantling tiles) Apply on materials such as metal, wood, resin, foam to convert surfaces to concrete before tiling or decoration.
Surface preparation
Surfaces must be clean and free from dust, cement, oil or other foreign materials.
If the surface has cracks Should repair cracks first Using suitable repair material
Sprinkle water on the surface. To reduce heat from the surface before applying crocodile flex shields.
Mix ratio
Crocodile Flex Shield 2.5 kg. Per 1 liter of water or
Crocodile Flex Shield 2.5-2.7 parts per 1 part water by volume.
Mixing
Pour the crocodile flex shield into the water and mix according to the specified ratio, spin with a low speed drill, about 150 rpm (150 rpm) and mix well.
After mixing, use within 1 hour when the mixture starts to solidify. Do not add water and reuse. Should be discarded and mixed again
Applications
Use a brush or roller. Apply evenly on the surface 2 rounds.
By applying on the 2nd round after applying for the first time, dry for 30-90 minutes and apply in the first perpendicular direction to the first round.
After applying, the surface should be protected from being exposed to water for 3 days.
Tiling the surface should be done after letting the surface dry for at least 3 days.
Rate of use
1-1.5 kg / / / / Sq. M.M. / / 2 trips
Restrictions on use
In case of applying on non-absorbent surfaces or polished cement, the adhesion force will be reduced if abrasion is immersed in water.
Caution
The product contains Portland cement and other additives. Should use safety protection equipment such as gloves, dust masks, glasses, etc.
In case of contact with eyes, rinse with clean water several times immediately