DTECH USB to TTL Serial Adapter FTDI 3.3V/5V Testing Cable …, North-Eastern Islands

????Welcome to DTECH-factory outlet????
Below are the details of our products:

6-Foot FT232RL FTDI USB to TTL serial adapter cable for 3.3V logic level serial communication

It is built with FTDI FT232 chip, FTDI’s royalty-free VCP allow for communication as a standard COM port and D2XX ‘direct’ drivers provide DLL application programming interface; a great conversion data cord to meet with your needs of debugging, boot-loading, programming, etc.

Features:
The I/O pins of the FTDI wire are configured to operate at 3V3 logic level
-Entire USB protocol handled by the electronics in the cable;
- UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity;
- Data transfer rates from 300 to 3M baud rate at TTL levels;
- Fully assisted hardware (RTS#/CTS#) or X-On / X-Off software handshaking;
- Internal EEPROM with users writable area;
- Supply voltage comes from USB bus, no external supply required;
- UHCI / OHCI / EHCI host controller compatible.

Specific:
Interfaces: USB 2.0 type A Male Port ; 3 Pin/4 Pin/6 Pin Female Socket Header
Supports Windows 2008, XP and XP 64-bit, Vista and XP 64-bit, CE 4.2, 5.0 and 6.0; Windows 7, 8, 8.1, 10 (32 and 64-bit); Mac OS 8/9 , OS-X; Linux 2.4 and greater

What’s Included:
1 x USB to Serial TTL Level Converter Cable
1 x User Manual

-Quality testing will be carried out before the product is sent out of the warehouse
-If you encounter quality problems after receiving a product, you can contact us first.

????Any questions and advice, welcome contact!