[PS5 Fighting Board] Makestick Pro Joystick, North-Eastern Islands

⭐ Information

This product is a custom arcade joystick compatible with PS5 / P54 / PS3 / PC.
Makestick Pro with built-in PS5 Fighting Board
It can be used immediately after wired connection to the main body, this model supports X-INPUT input signals on the PC.
※ It is immediately recognized after wired connection to various consoles and PCs, and no original controller or USB dongle is required.
It supports X-INPUT signals on your PC and is automatically recognized in steam fighting games.
Easy replacement and upgrade of various parts worldwide, including Myungshin, Samducksa, Sanwa, Seimitsu, etc

⭐ Change Mode
This model is recognized as an XBOX360 controller when connecting to a PC.
If you want to connect to a PC or any console in that mode, you can change the mode to the device if you connect the USB with a certain button pressed.
The last connected mode is saved, so if you switch the console and connect it, please refer to the table below to change the mode and connect it.

Recognized as a PS5 controller ( connect USB port while pressing △ Key )
Recognized as PS4 Controller ( △ Connect USB port while pressing Key )
Recognize PS3 Controller ( □ Connect USB port while pressing Key )
Recognized as Nintendo Switch Controller ( connect USB port while holding down X Key )
Recognized as X-INPUT Controller ( connect USB port with R1 button pressed )

This model can change the input signal of the lever as follows.
Convert to left analog input signal (start + lever input to left for 3 seconds)
Converts to right analog input signal (start + lever input to right for 3 seconds)
Converts to digital D-Pad input signal (start + input above levers for 3 seconds)

lf you want to switch back to the automatic detection mode, please hold down "START" button
and then plug USB cable to PC console.

⭐Product Spec
Manufacturer : IST MALL
Country of origin : Korea
Model name : ISJ-2072
Lever : Myungshin Fanta Lever 24GN
Button : Sanwa Button (OBSF-23,30)

⭐ Please Note
There are some thin, thin solid lines that look like gis on the outside of the makestick.
This part is called a weld line that occurs during the plastic manufacturing process.
Please understand that this is a common occurrence in all-in-one plastic products with holes, and this is not a reason for return.
There are no functional problems, so you can use them with confidence.













#Tekken8 #Tekken7 #Tekken #game console #game #battle game #korean stick #progamer #joystick #knee #korea Joystick #Makestick Pro #korea