10A speed control switch 12V 24V 36V universal PWM pulse …, North-Eastern Islands

Working voltage:DC12V-DC36V.
Maximum current 10A.
Control Power: Voltage * Current = Power (12V when the power is 12 * 10 = 120W .......... 36V maximum power of 200W).
Output frequency 25Khz.
Size: 6cm x 4cm x 2.7cm (2.36inch x 1.57inch x 1.06inch).
100% Brand new and high quality
The max current of this device is 10A at 12V, when exceed 5A,
it must require the bigger heat sink, and add the fan to work together.

12V24V36V universal PWM pulse width DC motor speed controller 10A speed control switch

General PWM DC Motor Speed Controller

This speed governor is small in size and high in power. If the motor is used for a long time, the motor load current should not exceed 5A. If the temperature exceeds the radiator, the temperature will be very high, and it needs to be forced to dissipate. )

The cable connected to the potentiometer is a thick 24AWG wire, not a common cable on the market!

Precautions and instructions for use
-The input of the DC motor speed controller is direct current, and cannot be directly connected to alternating current (such as: household 220V alternating current), otherwise it will burn out
-The positive and negative poles of the DC power supply cannot be reversed, otherwise the governor will be damaged.
-The motor can be positive or negative, when the running direction is inconsistent with the expectation. The direction can be changed by adjusting the line sequence.
-The potentiometer knob can change the duty cycle of the governor output, thereby changing the motor speed.