GOOJODOQ Bluetooth Wireless Keyboard Bluetooth 3 102 Keys …, Novena

⌨️Bluetooth 1+Bluetooth 2+Bluetooth 3+2.4G
The keyboard and mouse are designed with three-speed toggle switch. The mode switching adopts blue-green dual light indication
Charging port supports high voltage resistance (30V) All use Type-C charging port
four devices Fast switching between
102.button minimalist layout (two button area)All code pairs,dual use can also avoid signal series
The keyboard and mouse are equipped with a receiver storage compartment
iPad becomes tablet.

????Keyboard and mouse can be charged
Both the keyboard and mouse adopt industrial grade 30V high voltage design to avoid charging damage to the product due to excessive voltage
Keyboard battery capacity：300 mAh
Mouse battery capacity：500 mAh
Charging time：2-4 Hours
Sleep Auto≈5 min'

????Comfortable scissor toe and rebound frame
Short key travel, convenient rebound style allows every single tap to be useful, this is your office password A good friend

????Plug and play
Keyboard and mouse share one receiver, only one USB interface, plug and play

????️Multimedia capabilities
FN+ESC can replace traditional F1-F12 keys and multi-media keys for flip use, Some devices with memory
FN+F4=Take
FN+F1=Brightness+
FN+F2=Brightness-
FN+F3=Home bar
screen capture
FN+F5=Search
FN+F6=Lock screen
FN+F7=Previous song
FN+F8=Play/Pause
FN+F9=Next song
FN+F10=mute
FN+F11=Volume-
FN+F12=Volume+

✔️Connection instructions
2.4G mode
Remove the USB receiver
(located on the back of the keyboard)and insert it into the computer's USB port,then adjust the gear switch to 2.4G.Ready to use (keyboard and mouse sharing)
(Fn+1connected device 1)Bluetooth mode:(Fn+2connected device 2)(Fn+3 connected device 3)
One-press combination to switch devices;

Merge long press to change Bluetooth devices To change devices, please perform the following operations:
(1).Press and hold the Fn button on the keyboard and press 1 combination for 3 seconds
(2).The blue light flashes,and Bluetooth device 1 enters the sought state
(3).On device side→open system settings→turn on Bluetooth→search to add it
(4).Device Bluetooth 2.3 connection method is the same as 1