VariCore VCP4 Charger Smart Widening 26650 26700 32700 …, Pasir Ris

Product Features
Input Type-C DC 5V = 3A/9V = 2.2A
Support Battery Model
  1.2V Ni-MH/Ni-Cd: Aa/AAA/AAA/C/D/SC
  3.6V/3.7V/3.85V
Li-ion/IMR/INR/ICR: 10440/14500/14650/RCR16340/16650/17500/17650/17670/
18350 / 18490 / 18500 / 18650 / 20700 / 21700 / 22700 / 26650 / 26700 / 32650 /
32700 (Maximum Length 75mm)
3.2V LiFePO4: The Same Model

Charging Cut-Off Voltage
  4.20 ±0.05V/4.35 ±0.05V (Li-ion)
3.60 ±0.05V (LiFePO4)
1.48 ±0.1V (Ni-MH/Ni-CD)

Charging Current Optional: 0.5A/1A/2A
Discharge Current Fixed: 500mA

Discharge Cut-Off Load Voltage
1.2V Ni-MH: 0.86V
3.6V/3.7V/3.85V Li-ion: 2.8V
  3.2V LiFePO4: 2.2V

Screen Display
Digital Display Corresponding Channel Data.
The Backlight Will Automatically Turn Off After 30 Seconds Of Work, Press Any Key To Wake Up.
The Corresponding Channel Light Is Always On When Fully Charged.
Operating Environment
Temperature: 0℃ ~ 60℃
Humidity: 35%~95%

Physical Parameters
Size: 153mm X 123mm X 38mm
Weight: 230g (Without Battery And Power Cord)

Features
1.     Automatically Identify USB DC 5V And QC, Compatible With PD3.0/DC9V.
2.     Rich LCD Display Shows Voltage, Time, Percentage, Charging Capacity.
3.     0V Voltage Battery That Can Activate Protection Board Protection.
4.     The Fourth Slot Has Charging, Discharge, And Division Functions.
5.     Suitable For 1.2V Ni-Mh Battery Charging, 3.2V LiF4PO4, 3.6V/3.7V Lithium Battery, 3.85V Lithium Battery Charging.

Operation Introduction
Charging Settings:
1.     Connect The Power Supply, The Charger Automatically Recognizes USB DC5V And QC, And The PD3.0/DC9V Voltage Works.
2.     The Battery Is Put Into The Channel (It Is Forbidden To Break The Skin And Put It In The Battery Slot, There Will Be A Risk Of Short-Circuit Explosion!!), The Charger Automatically Recognizes The Battery Type, And Starts To Work, And The Screen Displays Data.Life LiFePO4/Li-ion 4.35V Battery, Need User Double Click "MODE" Button, Manually Select Battery Type.
3.     Short Press "SLOT" To View C1, C2, C3, C4, The Current Screen Displays The Information As The Charging Status Information Of The Corresponding Channel.

Current Settings:
Long Press The "Mode" Button Until The A Flashes On The LCD Screen, And Then Short Press The "Mode"
Li-ion Battery Can Be Switched To Charging Current 0.5A, 1A, 0.25A.NiMh Battery Switchable 0.5A, 0.25A.
The Screen Display Input 5V (Max 3A, 15W): C1, C4 Can Be 1A, C2, C3 Can Be 0.5A; When C1, C2, C3 Channels Have No Battery, C4 Channels Can Be Up To 2A (Lithium Battery Only).
The Screen Display Input QC/PD 9V (Max 2a, 20W): C1, C2, C3, C4 Can Be 1A; When C2 Channel Has No Battery, C1 Channel Can Be Up To 2a; When C3 Channel Has No Battery, C4 Channel Can Be Up To 2a (Lithium Battery Only).

Battery Type Setting
Double Click The "Mode" Button, The Battery Type Flashes, Short Press "Mode ", You Can Choose The Battery Type To Charge: Li-ion4.20V; LiFePO4; Li-ion4.35V.

Capacity Test Setting (Fourth Channel Only)
Press The "SLOT" And "MODE" Butto