MATA 2 inch drill well jet pump bit, Pasir Ris

MULTI-purpose jetpump eye for cesing drilled wells.....
A. 2" inch pipe
B. 2.5" inch pipe
C. pipe3"inch

Instructions for use must be paid attention to

- MULTI jet eye installation in a 20 meter drilled well depth, 2" inch cesing should be positioned at 12 meters or on 3 pipes, 1 inch valve test, connecting 1/2 inch pipe tail pipe, one stem pipe And don't forget to add a filter

-Installation of jet bits in 2" inch drilled wells must not use connection sockets. To connect pipes, you can only use regular pipe sockets that come with the end of the new pipe or make it yourself by heating it

-Installation of the valve test is better to buy a stronger brass one. Before installing it, check first. The spring inside the valve must be soft and not leaking.

-installation of jet bits for maximum results in 2 inch drilled wells, use 3/4 suction pipes and 3/4 push pipes too, use 1/2 in pipe only 1 meter, connection 1/2 to 3/4 pipes In directly, sometimes it can fit as long as you don't use over-stroke

- The cleanliness of the machine must not install the machine full of rust, the bottom filter is for the safety of the jet's work so that it doesn't get clogged. Don't let any leaks at all because of the influence of water, it won't rise.

B. Installation in a 2.5 inch drilled well, 20 meters deep
Jet eye position at 12 meters 1/2 inch pipe valve, one new filter rod
3/4 inch Suction Pipe
3/4 inch Push Pipe
Can use a connection socket
The pipe connection should not be the same height, it must be up and down

C. Installing a jet eye in a 3" inch flat drill well, the method is the same as above, it can only be more flexible, you can use 1 inch suction and 3/4 push pipe, free to use a connection socket

Maybe that's not enough. info on WA Iday, WA number is on YB IDAY BANDAR MATA JET MODIFICATION TANGERANG.....THANK YOU
Item price includes shipping fee that should be borne by the buyer.