High Quality Kawasan KW-RS686C Touch Lamp Holder, radar …, Pasir Ris

KAWASAN KW-RS686C Touch Lamp Holder

• This is an induction device that uses microwave technology. Using 5.8GHz Radar waves detect body temperature movement with very high sensitivity, features through wood, glass, thin wall...Has the effect of automatically turning on the light when someone moves in the scanning area.
• With the function of adjusting the LUX (morning/dark) level of the environment, if it is bright enough, there is no need to turn on the light to save electricity.
• With continuous motion detection properties, the light on time is maintained during the setting time until there is no movement in the area where the radar wave of the transmitter is detected. When it comes out, the device will turn off the light
Actual applications:
• • The most basic application of the touch is used to turn on and off lights for Toilets, Living Rooms, Standby Rooms, Hallways - Hotel Stairs or houses...-
• • Install for stairs with long distances, install microwave sensors at the stair light position, when moving from top to bottom or from bottom up, the touch also receives waves. And and turn on the lights in time.
• • Solution for office buildings or factory, factory dressing room....
• We install the touch connected to the bulb and adjust it so that the scanning angle towards someone moving, then adjust the 2 buttons: the time button turns off the light and the touch brightness. Application. responsive. responsive.
Benefits:
• • Cost savings do not need to install many infrared sensors.
• • Helps the family to prevent theft because the microwave sensor can penetrate the wall, plaster, wooden doors, glass doors, plastic...so it can be turned on when theft is near the house.
• • Not affected by ambient temperature above 32°C.
• Used to warn theft, we also use the same (replace the bulb with a bell or siren...)

Technical SPECIFICATION
• Using 5.8GHz radar wave technology
• Operating voltage: 180-220VAC/50-60Hz
• Scanning Angle: 360°/110°
• Touch distance: 3-8 m (corresponding to a scanning radius of 1-5m)
• Auto-off adjustment time: 20 seconds to 5 minutes
• Operating sensor adjustment brightness: from 2LUX(dark) to 800LUX(bright)
• Power Consumption: <0.2W
• Output power E27: 100W (compact lamp)
• Operating temperature: -10+70°C
• Installation height: 1.5m ~ 5m
• Watertight level: (IP20 installed indoors, dustproof, steam resistant)