UV221 Mechamato Ironing Patches Patches Kid Clothes DIY …, Pasir Ris

Product introduction
️ Product introduction: Hot stamping stickers
️ Style: Cartoon
️ Material: Polyurethane
️ Gender: Unisex
️ Scope of application: clothing, home textiles, hat, handbags, toys and shoes, etc.
️Due to the different shapes of each pattern, the dimensions we annotate are estimates of the length of the longest side.
️The size of the product is hand quantity, there will inevitably be errors! beg to be excused!
️If the iron is too hot or stays for too long, it will cause damage to the heat transfer sticker. This is not a problem with the quality of the sticker, it is caused by improper operation.Precautions when using an electric iron
1️⃣ Arrange the clothes flat and place the pattern in the correct position;
2️⃣ Turn off the steam on the electric iron (it is better not to use a steam iron), the temperature is about 150 ° C;
3️⃣ Pump the iron down firmly for about 15 seconds, noting that the pressure must be sufficient.
4️⃣ For larger area patterns, the iron should be moved back and forth in a small area, with uniform force.
5️⃣ After completing the previous step, tear the transparent film of the surface as carefully as possible. While tearing, please pay attention to whether there is a pattern that is not printed on the clothes, and if so, follow step 3 in a small area until the pattern is completely printed on the clothes.
6️⃣Wait 24 hours before washing. If using a washing machine, turn the printed side inward.Precautions for using a heat press
1️⃣ Set the temperature of the heat press machine to 150°C~160°C;
2️⃣ Place the clothes flat on the heatproof ironing table, and place the pattern in the correct position;
3️⃣ Press the handle firmly for about 15 seconds, lift the handle and remove the laundry;
4️⃣ The temperature of the clothes is high, and it can be left for a few minutes before proceeding to the next step;
5️⃣ Tear the transparent film of the surface as carefully as possible. While tearing, please pay attention to whether there is a pattern that is not printed on the clothes; If so, cover the pattern with a transparent film and follow step 3 in a small area until the pattern is completely printed on the garment.
6️⃣ Wait 24 hours before washing. If using a washing machine, turn the printed side inward.

If the item you received is defective, please contact us immediately.
⭐If you are satisfied with our products, please give us positive feedback (5 stars ).
Please contact us before leaving any negative feedback or dispute. Please give us a chance to resolve any issues. thanks !