【dinghingxi2】X14 ELRS AIO 5in1 Flight Controller Built-in …, Sembawang
【dinghingxi2】X14 ELRS AIO 5in1 Flight Controller Built-in …, Sembawang
$203.07
-
Sembawang -
Posted: less than a week ago
-
Save -
Share
Description
FC:1.MCU: STM32G473CEU6
2.Gyro: ICM42688P
3. memory: 16MB
4.Sensor: Voltage & Current
5.BEC: 5V, Max. 2A
FC:
UART: UART 1, UART 2, UART 3 (For RX), UART 4(For VTX)
BetaFlight OSD: AT7456ELAH
ESC: 12A continuous
OPENVTX: 5.8GHz 48 channels, Max. 400mW
FC firmware target: CRAZYBEEG473
USB port: SH1.0-4Pin
Battery connector: XT30 or A30
Mounting hole size: 25.5mm x 25.5mm
ESC:
Power input: 1-2S Lipo input
Current: 12A continuous, 15A peak
ESC firmware: V0.19 48KHz Bluejay
Firmware target: Z_H_30_48KHz
Digital signal protocol: DShot300, DShot600
VTX:
OPENVTX Firmware
Support firmware upgrade by openvtx configurator
Output power: PIT/10/25/100/400
Frequency: 5.8GHz 48 channels, with Raceband: 5658-5917MHz
Channel SEL: SmartAudio2.1
Modulation type: FM
Operating temperature: -10℃-+80℃
Antenna port: /U.FL
RECEIVER:
Serial ExpressLRS 2.4GHz
Antenna: Enameled copper wire 31mm length
Firmware target: Happy Model EP1/EP2 2.4GHz RX
Telemetry output Power: Less than 12dBm
Compatible with ExpressLRS V3.x.x TX Module
ExpressLRS firmware version 3.0.1
Support flash firmware by WIFI
Bind method is the same like all ExpressLRS 2.4GHz receivers
Color: Black
Material: PCB
Package Contents:
1 x Flight Controller Kit
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
2.Gyro: ICM42688P
3. memory: 16MB
4.Sensor: Voltage & Current
5.BEC: 5V, Max. 2A
FC:
UART: UART 1, UART 2, UART 3 (For RX), UART 4(For VTX)
BetaFlight OSD: AT7456ELAH
ESC: 12A continuous
OPENVTX: 5.8GHz 48 channels, Max. 400mW
FC firmware target: CRAZYBEEG473
USB port: SH1.0-4Pin
Battery connector: XT30 or A30
Mounting hole size: 25.5mm x 25.5mm
ESC:
Power input: 1-2S Lipo input
Current: 12A continuous, 15A peak
ESC firmware: V0.19 48KHz Bluejay
Firmware target: Z_H_30_48KHz
Digital signal protocol: DShot300, DShot600
VTX:
OPENVTX Firmware
Support firmware upgrade by openvtx configurator
Output power: PIT/10/25/100/400
Frequency: 5.8GHz 48 channels, with Raceband: 5658-5917MHz
Channel SEL: SmartAudio2.1
Modulation type: FM
Operating temperature: -10℃-+80℃
Antenna port: /U.FL
RECEIVER:
Serial ExpressLRS 2.4GHz
Antenna: Enameled copper wire 31mm length
Firmware target: Happy Model EP1/EP2 2.4GHz RX
Telemetry output Power: Less than 12dBm
Compatible with ExpressLRS V3.x.x TX Module
ExpressLRS firmware version 3.0.1
Support flash firmware by WIFI
Bind method is the same like all ExpressLRS 2.4GHz receivers
Color: Black
Material: PCB
Package Contents:
1 x Flight Controller Kit
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Highlights
-
Price$203.07
More details
-
ConditionNew
-
Flag -
Block ad
Safety Tips
Be careful; if it seems too good to be true, it most likely is.
More info about this ad
【dinghingxi2】X14 ELRS AIO 5in1 Flight Controller Built-in … has been posted in the Sembawang Drones category on Locanto.
If you’re looking for something similar, check out DJI Mavic Mini Intelligent Flight Battery, Sembawang, DJI Fixing Screw 1/4 ''-20 Ronin SC/4D/RS 3/3Pro/RS 2/RSC 2 …, Sembawang or Sunnylife YK570 Controller Protector Sun Hood Control for … in Sembawang, also posted in Drones. Currently, there are 79 ads posted in the Drones category in Sembawang.
Interested in more? Widen your search to view ads in nearby areas of Sembawang. This includes Drones in Seletar, Yishun and Mandai. There are more ads within a 15 km radius for this category. If you want to view those ads, click here.
Flag this image
