ADT-Link M.2 NVME to PCI-E x4 x8 Extension Cable PCI-E …, Sembawang

ADT-Link M.2 NVME to PCI-E x4 x8 Extension Cable PCI-E 4.0x4 gen4 64G/bps Adapter Cable for M2 NVME 2230 2240 2260 2280 SSD Riser Cable

Specifications:
Quantity: 1 pc
Brand: ADT-Link
Name：M.2 NVMe to PCI-E x8 / PCI-E X4 Extension Cable
Model：M48 / M42 series products
Cable length: 15cm, 25cm
Speed Bandwidth: PCI-E4.0 x4 gen4 64G/bps

Note:
1. Come with SATA power adapter cable, must be connected to get 12V power.
2. Support PCI-E4.0, but as long as the extension cable is connected to the signal will be attenuated.Older devices are not supported. Equipment more than 3 years old. Please do not buy.
3. Inserted into the 1x slot with anti-dull impossible to insert the reverse, but inserted into the 16X slot must be careful not to reverse the insertion, inserted in reverse will burn the gold finger. Burning gold finger must be inserted backwards.
4. If you are sure that the motherboard power supply enough, the extension cable can not need an external power supply. No enhancement of the power supply port of the motherboard power supply is insufficient, the extension cable must be connected to an external power supply.
5. When plugging the line must be clear direction, do not insert the reverse or insert the offset, to prevent burning equipment, plug the line first hold the equipment socket and then plug the line, to avoid excessive force will be socket pins plugged off.
6. Use heat shrink tubing to protect the welding point of the two ends of the wire, and prohibit pulling and bending.
7. Our products are 100% power test before shipment, the gold finger will be tested with traces of insertion and removal. If you mind this, please not to buy.