GEPRC Flight Controller F722 F405 HD Taker H60_BLS 60A 4IN1 …, Sembawang

MCU: STM32F405
IMU: ICM42688-P(SPI)
Air Unit Connection: Direct plugging into DJI Air Unit
Black Box: 16M onboard
Barometer: Support
Motor outputs: M1-M6
USB Interface: Type-C
OSD: Betaflight OSD w/ AT7456E chip
BEC: 5V@3A,12V@2.5A dual BEC
Firmware Target: GEPRCF405
Mounting: 30.5×30.5mm,φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle
Input Voltage: 3-6S LiPo
UART: 6 UARTs
Power Filter: Integrated LC filter
Weight: 7.3g

Input Voltage: 3-6S Lipo
Ammeter: Support
Continue Current: 60A
Burst Current: 65A(5 seconds)
Support Protocol: Dshot 150/300/600
Size: 42×45.7mm
Mounting Holes: 30.5×30.5mm, φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.
Weight: 14.9g
Target: B_X_30

MCU: STM32F722
IMU:ICM42688-P(SPI)
Air Unit Connection: Directly plugs into the DJI Air Unit
Black Box: 512M onboard
Bluetooth: Supported
Barometer: Supported
USB Interface: Type-C
OSD:BetaFlight OSD w/ AT7456E chip
BEC:5V@3A,9V@2.5A dual BEC
Firmware Target: GEPRCF722_BT_HD_V3
Size:36.9×36.9mm, hole 30.5×30.5mm,φ4mm hole becomes φ3mm after using a silicone shock-absorbing ring
Input Voltage: 3-6S LiPo
UART: 5 groups (UART4 fixed for Bluetooth)
Power Filter: Integrated LC filter
Weight: 8.2g