Wireless Doorbell 150M Long Range 38 Chimes USB Interface …, Sembawang

????Product parameters
Receiver parameters
1. Working voltage: AC5V (USB interface power supply）
2. Power consumption: ≤0.5W
3. Operating frequency: 433.92 MHz
4. Operating temperature: -10 ° C~+45 ° C
5. Volume: 25~85dB (3-level volume adjustable)
6. USB Receiver size: L43×W41×H32mm

????Transmitter button parameters
1. Working voltage: DC 12V
1. Battery type: 23A 12V
2. Transmitter size: L80×W45×H21mm

Features:
???? Differentially set ringtones: Different buttons set different ringtones, easily distinguish between front and rear doors
????Built-in 38 welcome music/3-level volume adjustable
????This doorbell does not need wiring, plug and play, convenient and practical, easy to install
????The receiver is suitable for direct insertion into the USB power supply interface
????Applicable scenarios: residential, hotel, villa, hospital
????Remote control distance: Indoor distance is about 50 meters (without partition)，Outdoor open space is about 100-300 meters. (This data is the experimental test distance. The actual distance is affected by the applicable environment and obstacles. The more obstacles, the shorter the distance. The actual distance is subject to the experimental environment distance)


????????How to use
Packaged products are paired before they leave the factory, and no need to pair again.
To replace transmitters or add transmitters, do the following:

???? Pairing method
The receiver socket is plugged into USB power supply interface. When the power is on, (if different transmitters need to correspond to different ringtones, first press the music button to select the ringtone) and then press the receiver mode button for about 5 seconds until the indicator light flashes. Enter the pairing mode, at this time, press the transmitter, the receiver rings, the pairing is successful.

????Clear the Pair
Press and hold the receiver pairing button for about 10-13 seconds until the indicator light quickly
After blinking, stop blinking, that is, clear all pairing .