Ready Stock Fast Shipping KEKK/KEKK Spot Welding Machine …, Singapore

Reminder: Modify This Product Will Cause Damage, And The Consequences Will Be At Your Own Risk! Purchase Agree With This Terms.
---------------------------------------------------------
Farah Capacitor Micro Spot Welder
Pulse Output: Single Or Double Pulse
Display: Digital Tube Display
Version: K19 Series
-------------------------------------Function Description-------------------------------------------------------------
Spot Welding While Charging
Automatic Trigger Spot Welding, Double Pulse Strong Spot Welding Greatly Improves Spot Welding Efficiency
High-power MOS Parallel, Fully Discover Capacitive Performance
Digital Tube Displays Spot Welding Parameters, Easy And Fast To Use
6 Farad Capacitor Power Supply, Good Quality, No Need To Charge Regularly And Maintain, Durable
Voltage/temperature Real-Time Monitoring, Display Brightness Can Be Adjusted, Buzzer Switch Settings, Etc.
Fast Charging, Charge With The Equipped Power Adapter For About 25 Minutes, You Can Always Spot Welding
8awg Spot Welding Pen Super Soft Silicone Wire, Soft And Beautiful, Pen Needle Copper Tube One-Piece Molding, More Output Power
------------------------------------Spot Welding Range----------------------------------------------------
Spot Welding Is The Principle Of Using High-Current Local Rapid High-Temperature Melting Nickel Sheet And Cooling.
Suitable For Cylindrical Lithium Batteries Such As 14650, 17490, 18650, 21700, 26650, 32650, Ni-Mh Batteries And Other Steel Body Batteries.All Can Spot Welding Firmly.
Welding Thickness: 0.1-0.2mm Nickel-Plated Sheet/Pure Nickel Sheet, Can Also Be Superimposed With 0.1mm Nickel-Plated Steel 0.1mm Copper Sheet
Spot It Is Forbidden To Spot Welding Iron Lithium Monomers, Aluminum Copper Pole Ears And Soft-Coated Aluminum Pole Ears.
---------------------------------Charging Instructions--------------------------------
The Product Needs To Be Connected To The Power Supply For About 25 Minutes Before Use To Spot Welding
1.Control Board DC Port Charging: Voltage: 12V, Current: 3A
2.When Charging, The Panel Prompts The Light Red, And It Will Light Green When Fully Charged
Note: This Spot Welding Machine Has A Small Amount Of Power Storage, If You Disconnect The Power Supply, You Can Do A Small Amount Of Spot Welding.
Please Be Sure To Turn On The Power To Use, There Is No Trouble Of Charging Waiting.
--------------------------------------Operation Instructions-------------------------------------------------
1.Switch Machine: Press The Red ON/OFF Button To Turn ON/OFF The Spot Welder.
2.Setting Delay/Pulse 1/interval/pulse 2 Parameters: After Booting, Short Press The SEL Button To Adjust The Parameters After Selecting, Short Press V+/ V-, And Set.
Long Press The V+/ V-Button To Quickly Switch Gears.Double Pulse 0-60 Gears, 1 Gear Minimum, 60 Gears Highest.
3.Buzzer: After Power On, Long Press The SEL Button For About 4 Seconds To Turn Off/Turn On The Buzzer.
4.Display Screen: After Booting, Press And Hold The SEL Butto