Heavy Duty Graphite Ingot Mold 750g Gold Capacity + Free Divider, Woodlands

This mold has a thicker surrounding wall, namely 10 mm. Because the walls are thicker, they are more resistant when used continuously. Suitable for heavy duty use.
Outer Size: 105 x 55 x 30 mm
Graphite Ingot Hole Size: 65 x 35 x 20 mm
Graphite Material: High Purity Graphite 99.95% graphite
Resistance: 12μΩm
Density : 1.82 g/cm3
Compressive Strength : 60 MPa
Flexural Strength : 40 MPa
Porosity : ≤0.0043mm
Ash Max: 0.05 %

This graphite ingot / Graphite Singen mold is made from high quality high purity graphite so it can withstand temperatures of up to 1500 degrees Celsius. Even if metal is poured with high temperatures, this graphite mold is very stable and will not bend or twist.
Graphite Ingot molds are used as a place to pour precious metals such as gold and silver which are melted or melted. The function is the same as the iron singen that we have known so far but this graphite singen has several advantages compared to iron singens.

1.The graphite syngen will not rust so there is no need for maintenance and will not contaminate the printed metal.

2. The metal poured into the graphite syngen will not stick. So it does not require oil/oil like iron singens.

3. The printed metal is clean and free of contamination such as ol, oil or rust from iron.

4. In terms of safety, metal such as gold or silver at high temperatures poured into graphite will not mental onto the face, as often happens if the iron is still cold.

However, it is recommended that the graphite singen is still warmed sufficiently by placing it next to the loose kowi when you melt the metal. This aims to reduce the difference in temperatures that are too far between the metal and the mold which will increase the durability of the graphite syngen.